• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Bio-Fires - An Eco-Friendly Alternative to Real Fires

Biofires are a warm and cosy method of heating your home without the harmful gas or soot. They are easy to install similar to an electric fire.

The BARDA-funded contract enables the development of the BioFire Emerging CoV Panel, which is a nucleic acid amplification test for use with BioFire FilmArray Systems to detect human coronaviruses, both emerging and known, in nasopharyngeal or oropharyngeal sw and saliva samples.

Eco-friendly

A bioethanol fires fire can be an excellent alternative to wood or gas fires. The fuel is made with plant by-products, and a natural process converts sugars into alcohol. It offers many advantages over other fireplace types that include the absence of harmful emissions and a much less carbon footprint. Bioethanol is also a safer alternative to other fires as it does not produce smoke or soot. It does not require a flue and can be used in the garden or at home.

A multi-drug resistant (MDR) bacteria is one of the most dangerous health risks of the present. New testing methods can detect MDR bacteria early and help prevent further complications. One test that can help is the BioFire FilmArray multiplex PCR system. This test uses an approach based on symptoms to identify the most frequent pathogens that cause sepsis. The results are available within an hour, so doctors can start treatment immediately.

The Molecular PCR process amplifies DNA and RNA molecules to millions or billions of copies. This makes it possible to analyze small samples of tissue or body fluid to determine the presence of specific genetic sequences. It is a valuable instrument for lab professionals, and it can assist them in diagnosing serious diseases in a quick and cost-effective way. The BioFire film array PCR system is an ingenuous instrument for diagnosing infectious diseases. It can be utilized in many locations, including hospitals and laboratories.

If you are undergoing tests for respiratory problems, you can wipe a swab across your nose before sending it to the lab. BioFire's system provides a fast turnaround time, allowing clinicians to respond quickly. This means that there is less waiting for results and improved outcomes for patients.

The Chanouf Farm-Biofire business has created an Agroforestry waste recycling system, that makes use of olive and pear tree waste to produce biochar and biomass energy. The products are offered to the general public to replace traditional coal briquettes and charcoal with green alternatives. Bio-waste products are suitable for burning in a Kachelofen fireplace which generates radiant heat and is a more sustainable alternative to gas or electric fires.

Clean burning

By using a bio-fire, you not only save energy but also help the environment. Bioethanol combustion does not release harmful gases like carbon dioxide. It only releases water vapour and heat. This makes it a safer and cleaner option for Indoor Ethanol Fireplaces (Telegra.Ph) use.

Ethanol can be produced by the fermentation of sugars in plants. It is a renewable source of fuel. This means that it can be produced quickly and won't be depleted as fossil fuels such as coal and oil. Bioethanol helps reduce dependence on imports from abroad and the possibility of shortages.

Bio-fires are very easy to install and can be used in existing fireplace openings or as a freestanding unit. This makes them a convenient alternative to gas and wood fires. They are a great option for offices and homes which do not have chimneys.

When a bio-fire is lit, a specific media is installed in the burner that absorbs the liquid fuel ethanol while making it ready to burn. The ethanol is burned by the flames and the vapours are emitted into the air via the vent. This gives the flames a more natural appearance and a mesmerising beauty which isn't matched by gas or wood fires.

Bio-fires benefit from not requiring a vent or flue to replenish oxygen during combustion. They don't emit the carbon monoxide which is released into the room by gas fireplaces with open fronts.

The BioFire Respiratory Panel employs multiplex PCR technology to simultaneously test for 19 respiratory pathogens in less than an hour. This lets doctors identify and determine the presence of respiratory illness much faster than with conventional laboratory tests, which require patient visits. Both the patient and the health system benefit from this.

Safe indoors

bio ethanal fire-fires can be used indoors safer than real fires, since they don't emit smoke or ash, as well as carcinogenic fumes. They also do not emit carbon monoxide, which could cause death if breathed in. However, the bio-ethanol fuel is flammable and you must be cautious when handling your burner and refuelling it. The fuel should only be added after the burner has been switched off and the fire has cooled. Any spills need to be cleaned up immediately.

The company's diagnostic FilmArray system - BioFire Torch and BioFire 2.0--are simple to use and can run eight different diagnostic panels cleared by the US Food and Drug Administration as well as three additional panels approved for use in emergencies, and six environmental test panels. These tests include a respiratory panel that was developed to quickly identify and discriminate respiratory illnesses such as COVID-19. emerging coronaviruses and COVID-19.

Its COVID-19 panel has been awarded a grant from the Biomedical Advanced Research and Development Initiative (BARDI) which is part of the US Department of Defense's Strategic Access Program. The COVID-19 test is an antigen-based system that allows doctors to differentiate between the symptoms caused by COVID-19 and other respiratory illnesses with nearly the same accuracy as the current rapid antigen tests in use.

In addition, the company is developing a SARS-CoV-2 assay for its Respiratory 2.1 Panel. This multiplexed nucleic acids amplifying test will be available on the BioFire filmArray 2.0 and Torch Systems and will detect SARS CoV-2 and 21 respiratory pathogens using saliva and nasopharyngeal samples within less than an hours. The assay is being developed using an accelerated timeframe and submission to FDA for EUA and 510(k) clearance is expected in Q3 of 2020.

Bio-ethanol flame effect fires are safe to use, but should be kept away from things that can ignite, like curtains, pillows and blankets. They should not be set close to anything that could ignite, and you should always keep flammable materials at least 10 feet away from them. The bioethanol fuel should be stored in an area that is dry and secure so that pets or children are unable to reach it.

Simple to use

A bioethanol fireplace is easy to install and has no flue to be concerned about. All you require is a secure location to place it in and some fuel. Once you've filled it with fuel, you can light it. This will give the appearance of an actual flame. Once the flame is lit, it will heat the room without releasing much smoke. It will also produce heat, similar to a wood-burning fireplace. Bio fires are easy to maintain, and don't need any servicing, just the odd wipe down.

In contrast to other tests that are quick, the BioFire RP2.1-EZ test uses a syndromic approach to identify the most common signs of infection and return results in about 45 minutes. The test is designed for patients with respiratory symptoms that are upper respiratory and has a 98% specificity rate. The test can identify up to 19 viruses and three bacteria in one test, making it a great option for the treatment of patients.

The BioFire platform integrates multiplex testing, sample preparation and results reporting into one platform. This allows laboratories to streamline their workflow and eliminate the need for a series procedure that involves individual and send-out tests. This can lead to better patient outcomes by enabling the right test to be utilized the first time, and also by removing the need for costly tests based on culture. The BioFire system can identify pathogens on a cell level as well as their antimicrobial resistance gene. This information is more reliable than conventional methods.

Molecular diagnostics are increasingly being used to improve patient care and outcomes. The BioFire RP2.1 plus panel utilizes the syndromic approach to simultaneously target 23 of the most commonly identified pathogens that cause respiratory infections. The assay is available on the BioFire film array 2.0 and Torch systems, and can provide results in 45 minutes.

The test is available in the US under FDA Emergency Use Authorization. It will be available commercially following the initial DoD requirements are fulfilled. The BioFire Defense team has developed a fully automated sample-to result assay for rapid detection of COVID-19. This assay is currently under development and will be made available once the initial DoD demand is satisfied.