• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. They don't get rotten or rusty like aluminum and timber.

It is essential to clean and oil UPVC doors and windows regularly. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home, and could even be fatal. It is important to take the time to ensure that you're doing all you can to keep your windows in good condition.

For single pane windows, it is fairly easy to replace them, and the new window will usually fit inside the frame that was previously installed easily. If you have double-paned windows that are joined by internal beading, it is more difficult to remove and replace the old panes. In this situation, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

If you're planning attempt to remove the glass panes yourself it is crucial to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. It is also an excellent idea to lay down a drop cloth before you start working on the glass, so that any shards fall onto the cloth instead of onto the floor where they could be trodden under and cause further damage.

It's a great idea seal the gap after the glass has been removed. This will stop drafts and water from entering your property until a professional comes out to repair the window. It also acts as an obstruction to prevent criminals from getting into your home. If the gap is particularly large, you may be interested in the security door with an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. In time, they could be affected by a variety of issues such as sliding. A window that is sagging can cause problems with light, draughts and even security. It's crucial to act as soon as you notice your uPVC windows are sliding.

To repair a window that is sagging, you can try repositioning the hinges. You'll first need to open the windows so you can reach the frame. Then, using an screwdriver, remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, close the window and test it for fitting. If you're satisfied with the fit of the window, tighten the screws to keep them in place.

If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, leading them to loosen. It is important to replace your seal as quickly as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles may also loosen up. Often, this is caused by screws that have come loose over time. However, it can occur because the handle mechanism has worn out. It's fairly simple to fix a loose upvc window repair near me hand. First, you'll need to close your window and do a test to ensure that it fits. The joint at the corner of the sash should align with the joint on the casing. If it does not then you can use the screwdriver to loosen up the handle. Then turn the mechanism to position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home, and hinder your ability to control the temperature of your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Based on the severity of the problem the caulking that was used up may require removal before a new layer of caulk can be applied. It is essential to keep in mind that when it comes to uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area harder to clean and decrease the efficiency of your energy usage.

It is important to check that the drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more serious situations, you may need to think about replacing the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely that the issue is more with the seal than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or it blows open with an ease. These are easily replaced by any competent DIYer and are usually completed in just a few minutes.

Most households in the UK will have either top hung or side hung uPVC windows that have hinges and, like all mechanical parts, they are susceptible to wear and tear over time. Changing a window hinge is essentially a simple process, but it's easier to do if you have someone to assist in holding the frame in place.

Make sure that the uPVC hinges are closed and open in the proper direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The issue could be caused by opening the window incorrectly or due to a poor installation at the factory. This issue can be fixed by sending us a photograph on our website. We will be pleased to offer you advice.

It is also essential to grease the hinges regularly. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also reduce the risk of a window getting stuck and stop corrosion. This must be done at a minimum once a year. WD40 or other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a few different factors. First, the hinges due to wear and tear may become displaced, which can cause a gap to form between the sash and the frame. They can be repaired by giving them a thorough clean, however if they are beyond repair it could be necessary to have them aligned or replaced. In addition, the interlock could also become disaligned. This happens on the hinge side and could require to be cleaned. In some instances it might be necessary to replace them.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help control indoor temperatures and lessen the possibility of draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are usually fabric tubes filled with a filler, which can be put on top of your window sill. They can help keep cold air out and keep your home warm and cozy!

With a little regular maintenance and repairs, Upvc Window Repairs your upvc windows will continue to provide an excellent level of insulation and security for your home. It is crucial to recognize that windows last for a certain period of time and eventually, they will reach a point where it is more efficient to replace them than repair them. If you are experiencing issues with your Upvc windows, it's recommended to seek help from a professional immediately.